PVC, One Way Vision

You may have been familiar with the promotion of company names or advertisements on car rear windshield or office windshield? It is a sticker material made from PVC film. Characteristic of One Way Vision, the sticker has small holes so that the view is not obstructed when viewing from the back (inside). That is why it is called One Way Vision. Can only see from one direction.

The Product Composition of One Way Vision is; PVC film, acrylic pressure sensitive adhesive, release paper.

Product Application:
Used in glass windows or doors, transparent board / PVC / PET, car rear windshield, etc.

Storage Conditions:
All One Way Vision products must be stored in dry packages with sufficient moisture and preferably be stored horizontally. Do not expose to direct sunlight or heat sources. Do not store with flammable and corrosive products. To avoid quality degradation problems, the product must be stored in suitable conditions. Storage temperature is 25 ° to 5 ° C and relative humidity is 50 – 15%.

Production and Application Environment:
Production environment: this product is recommended at a temperature of 25 ° to 5 ° C, a relative humidity of 50 ± 10%, a clean environment, without dust and without suspension. It is recommended that the product be moved from the warehouse to the printing room before 24 hours. During the printing process, ink temperatures are from 18 ° C to 28 ° C and temporary temperatures ranging from 25 ° C to 40 ° C, which can also be adapted to different environments. To get a good printing effect, please test the ink before printing.

Do not touch the surface until the ink is completely dry. Put the remaining ingredients in the package to avoid moisture. Because the chemical composition of the sovent ink will make the PVC film curved.

It is recommended to use sufficient margins (area restrictions) when printing and use environmentally friendly (non-toxic) solvents. Don’t start the finishing work before the ink is completely dry, like cutting. Laminate and paste. Application environment: temperature 20 ° – 10 ° C, relative humidity 50 – 10%; Stick the sticker on a flat, smooth and clean surface without dust and water splashes; It takes more than 2 hours for maintenance before lamination.